xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
24
Parameters
force_agree – (Optional) Specify to immediately execute the reboot command without further
confirmation.
Restrictions
Only Administrator-level users can issue this command.
Example
To restart the switch:
DGS-3420-28SC:admin#reboot
Command: reboot
Are you sure you want to proceed with the system reboot?(y/n)
Please wait, the switch is rebooting…
2-22 reset
Description
This command is used to reset all switch parameters to the factory defaults.
Format
reset {[config | system]} {force_agree}
Parameters
config - (Optional) Specify this keyword and all parameters are reset to default settings.
However, the device will neither save nor reboot.
system - (Optional) Specify this keyword and all parameters are reset to default settings. Then
the switch will do factory reset, save, and reboot.
force_agree - (Optional) Specify and the reset command will be executed immediately without
further confirmation.
If no keyword is specified, all parameters will be reset to default settings except IP
address, user account, and history log, but the device will neither save nor reboot.
Restrictions
Only Administrator-level users can issue this command.
Example
To reset all the switch parameters except the IP address:
DGS-3420-28SC:admin#reset
Command: reset
