A SERVICE OF

logo

Open as PDF
next previous
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
526
Success.
DGS-3420-28SC:admin#
52-9 clear mac_based_access_control auth_state
Description
This command is used to clear the authentication state of a user (or port). The port (or the user)
will return to un-authenticated state. All the timers associated with the port (or the user) will be
reset.
Format
clear mac_based_access_control auth_state [ports [all | <portlist>] | mac_addr <macaddr>]
Parameters
ports - Specify the port range to clear the authentication state.
all - Specify all ports.
<portlist> - Specify a range of ports.
mac_addr - Specify to clear a specified host authentication state.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the authentication state of all ports:
DGS-3420-28SC:admin#clear mac_based_access_control auth_state ports all
Command: clear mac_based_access_control auth_state ports all
Success.
DGS-3420-28SC:admin#
52-10 create mac_based_access_control_local mac
Description
This command is used to create a database entry.
Format
create mac_based_access_control_local mac <macaddr> {[vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}