A SERVICE OF

logo

xStackĀ® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
592
Format
enable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP trap support:
DGS-3420-28SC:admin#enable snmp traps
Command: enable snmp traps
Success.
DGS-3420-28SC:admin#
59-11 disable snmp traps
Description
This command is used to disable SNMP trap support on the switch.
Format
disable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the switch:
DGS-3420-28SC:admin#disable snmp traps
Command: disable snmp traps
Success.
DGS-3420-28SC:admin#