A SERVICE OF

logo

xStackĀ® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
73
DGS-3420-28SC:admin#
4-21 show authen server_host
Description
This command is used to display authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server hosts:
DGS-3420-28SC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- ---------- -----------------------
10.1.1.222 TACACS+ 15555 10 ------ 123
Total Entries : 1
DGS-3420-28SC:admin#
4-22 config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting for user to input on console, Telnet,
and SSH applications.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255> - Specify the amount of time for user input on console or Telnet or SSH. 0 means
there is no time out. The default value is 30 seconds.