A SERVICE OF

logo

xStackĀ® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
699
Example
To disable RIP:
DGS-3420-28SC:admin# disable rip
Command: disable rip
Success.
DGS-3420-28SC:admin#
71-5 show rip
Description
This command is used to display the RIP configuration for one or all the IP interfaces.
Format
show rip {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified, the system will display RIP configuration and statistics for all the IP
interface.
Restrictions
None.
Example
To display RIP configuration and statistics for all IP interface.