A SERVICE OF

logo

Columns and Fittings
Liners/adapters and inserts, general
18
1/8-inch Metal 1/4-inch Metal 1/4-inch Glass
Recommended 1/8-inch 1/4-inch 1/4-inch swage-
Column Fittings swage-type nut swage-type nut type nut and
and ferrules
3
and ferrules
3
graphic ferrule or
silicone O-ring(s)
Packed Column 19243-80510
1
19243-80520
1
None
Inlet Liners or or
19243-80530
1
19243-80540
1
(requires glass insert) (requires glass insert)
FID/NPD
2
19231-80521
1
19231-80530
1
None
Liners/Adapters
TCD Liners/Adapters None 19302-80020
1
19302-80020
1
(may require
altering the
column)
ECD Liner/Adapters 19301-80530
1
None None
Packed Columns
1
Use 1/4-inch swage-type nut and Vespel or graphite ferrule to install liner/adapter.
2
See Chapter 8 for details regarding jet exchange (if necessary).
3
See informationlater in this chapter regardingproper installationof swage-type fittings on packed
metal columns.
Table 1-2. Hardware and Recommended Fittings for Packed Column Installation