Hewlett-Packard 5890 II Plus Manual

A SERVICE OF

next previous

Keyboard and Displays

Entering setpoints

34

Examples of possible displays are provided where appropriate throughout

the manual.

If a particular function is not installed in your instrument, an

appropriate message is displayed when the key corresponding to the

function is pressed. For example, if no heated zone controlled by

DET B TEMP

is installed, pressing

DET B TEMP

gives the display:

ACTUAL SETPOINT

DET B NOT INSTALLED

Typical Display, a Function NOT Installed in the Instrument

Figure 2-3

Entering setpoints

To enter a setpoint value for a particular instrument function, the

function is first displayed by pressing the appropriate key(s).

Once the chosen HP 5890 function is displayed, a new setpoint value can

be entered at any time by pressing appropriate keys

0

through

9

,

.

,

-

, or possibly

A

,

B

,

ON

,or

OFF

. For a numeric value,

ENTER

is pressed to terminate the entry. Figure 2•4summarizes the two steps

involved.