A SERVICE OF

logo

5
5-11
Sending Functions
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The procedure for adjusting the density is explained below.
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the or key to select [Density].
5 Press the OK key. Density appears.
6 Press the or key to select your desired density.
7 Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8 Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Function Menu:
a
b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
1
Color Selection
T
Density:
a
b
4
w
Lighter -1
*********************
6
z
Darker
+1
5
y
Normal
0