A SERVICE OF

logo

Advanced Configuration AP-4000/4000M/4900M User Guide
Interfaces
70
NOTE: When enabling Auto Switch Mode, Proxim recommends that you also enable Auto Channel Select. ACS is is
configured on the Wireless A or Wireless B page. See Wireless-A (802.11a/4.9 GHz Radio) and Wireless-B
(802.11b/g Radio) for more information.
Current Mesh Mode: Displays the current Mesh mode of the AP (Mesh Portal or Mesh AP).
Disable Client Access on No Uplink Connection: When this option is enabled, the AP will not provide wireless
connections to clients on both radios if the unit does not have an uplink connection.
Notify Clients on Uplink Change: When this option is enabled, the AP will send a deauthentication message to
currently connected clients when its uplink changes. This allows clients to restart a fresh connection, renewing their IP
addresses if necessary.
For more information on Mesh, see Mesh Networking.