Proxim AP-4000 Manual

A SERVICE OF

next previous

Advanced Configuration AP-4000/4000M/4900M User Guide

Filtering

90

Figure 4-33 TCP/UDP Port Filter Configuration

2. Click Add under the TCP/UDP Port Filter Table heading.

3. In the TCP/UDP Port Filter Table

, enter the Protocol Names to filter.

4. Set the destination Port Number (a value between 1 and 65535) to filter. See the IANA Web site at

http://www.iana.org/assignments/port-numbers for a list of assigned port numbers and their descriptions.

5. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).

6. Set the Interface to filter:

• Ethernet

• Wireless Slot A

• Ethernet and Wireless Slot A

• Wireless Slot B

• Ethernet and Wireless Slot B

• Wireless Slot A and B

• All interfaces

7. Click OK.