4 SpeedTouch™ Internet Connectivity
E-DOC-CTC-20040123-0001 v3.0
47
Starting a broadband
Internet session
Proceed as follows:
1 Click the Internet Connect dockling.
Note If the Internet Connect dockling is not available, go to the Applica-
tions folder on the system startup disk and double-click Internet
Connect.
2 The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list.
3 If needed, enter user name and password for your user account at the Service
Provider.
4 Click Connect.
As soon as the connection is established you can open your web browser and surf the
Internet.
Terminating a
broadband Internet
session
Proceed as follows:
1 Click the Internet Connect dockling.
Note If the Internet Connect dockling is not available, go to the Applica-
tions folder on the system startup disk and double-click Internet
Connect.
2 The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list
3 Click Disconnect.
The connection is released. As a result no Internet connectivity exists anymore.
