7 Support
E-DOC-CTC-20040123-0001 v3.0
86
7.2.1 Upgrade via the SpeedTouch™ Upgrade
Wizard
Introduction The procedures described in this section are valid only in case:
• You run a MS Windows Operating System or Mac OS X.
• Your SpeedTouch™ and computer are properly connected:
• Through Ethernet or USB in case you run an MS Windows OS
• Through Ethernet in case you run Mac OS X
Note It is not possible to upgrade your modem over a wireless connection.
• The new system software file is of the type bant-d_XX427x.bin,
e.g. bant-d_AA427A.bin.
During the upgrade procedure in most cases configuration settings are backed up by the
wizard and restored after uploading the system software.
Starting the
SpeedTouch™ Upgrade
wizard
Depending on your Operating System, you must start the SpeedTouch™ Upgrade
wizard as follows:
On MS Windows
Operating Systems
Proceed as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note If the SpeedTouch™ CD Browser window does not appear auto-
matically, click Run on the Start menu and enter the following path:
D:\Menu.exe where D stands for the drive letter of your CD-ROM
drive.
2 The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Note The selected language will also be used as default language in the
SpeedTouch™ web pages. See “ Language” on page 75 for more infor-
mation on how to change the web page language.
Topic Page
On MS Windows Operating Systems 86
On Mac OS X 88
