5 SpeedTouch™ Web Interface
E-DOC-CTC-20040123-0001 v3.0
60
To disable any security (No security)
1 Select the entry Security level 0 which allows you to proceed with the fol-
lowing window:
2 Click Apply to apply your changes.
Note The colour of the WLAN LED will change to red.
3 Reconfigure your wireless client(s) to use the changed settings.
4 Click Save all to save your changes to persistent memory.
Note The WEP and/or WPA-PSK settings will be preserved in case you
want to switch on security again later.
Select Security to:
• View the current Access Control List (ACL) and ACL Access Mode. Via
this table you can manually add or delete wireless clients and configure how wire-
less clients are allowed to connect to the SpeedTouch™580 WLAN.
The following table is shown:
Following ACL Access modes exists.
• New stations are allowed (automatically).
• No new stations are allowed.
• New stations are allowed (via registration).
