A SERVICE OF

logo

151Preparing for an Encrypted Videoconference via LAN
Chapter 7: Encrypted
Videoconference via LAN
Preparing for an Encrypted
Videoconference via LAN
To start an encrypted videoconference, each terminal has to set the same
password and set “Encryption via LAN” to “On” in the Encryption via LAN
menu.
1 Enter a password using 13 to 20 alphabetical characters, numerals or
symbols.
2 Select “On” from “Encryption via LAN” in the Encryption via LAN menu.
For details on setting, see “Encryption via LAN Menu” on page 61.
If you set “Encryption via LAN” to “On”, you cannot connect to a terminal that is not
equipped with the encryption feature to a terminal with “Encryption via LAN” set to
“Off”, or to a terminal without the same password as that of your system.
You can conduct a videoconference without an encryption feature with a terminal
connected via an ISDN even if you set “Encryption via LAN” to “On”.
Notes
Page: 1/1
Off
Encryption via LAN
Encryption Password
Save Cancel
Encryption via LAN