Filter
Top Products
Operating and Safety Instructions
11
3.2.4.
Machine should be operated only by staff members, who have read and
understood the contents of this manual.
3.2.5.
All directives, recommendations and general safety rules contained in this manual
have to be observed fully. The machine cannot be operated in any way for purposes
other than those described herein. Otherwise, the manufacturer shall not be deemed
responsible for any damages or injuries. And such circumstances would lead to the
termination of the warranty.
3.3. GENERAL SAFETY INFORMATION
3.3.1
. The power cable should be led in such a way that nobody can step on it or
nothing can be placed on it. Special care has to be taken regarding the inlet and
outlet sockets.
3.3.2.
If the power cable should be damaged during operation, don't touch and
unplug it. Never use damaged power cables.
3.3.3.
Don’t overload machines for drilling and cutting. Your machine will operate
more safely with power supply in accordance with the stipulated values.
3.3.4.
Don’t place your hands between parts in motion.
3.3.5.
Use protective eye glasses and ear plugs. Don't wear oversize clothes and
jewels. These can be caught by moving parts.
3.3.6.
Keep your working place always clean, dry and tidy for accident prevention
and safe operation.
3.3.7.
Use correct illumination for the safety of the operator. (ISO 8995-89 The Lighting
of Indoor Work Systems)
3.3.8.
Don't leave anything on the machine.