Filter
Top Products
Operating and Safety Instructions
14
5.2. ELECTRIC CONNECTION
5.2.1.
The three-phase power cable socket has to be in accordance with the socket on
the machine.
5.2.2.
Use a connection cable socket in accordance with the CE Safety Directives.
5.2.3.
Check the inlet power supply before powering the machine. See Page 19 Item 3.8.3.
* The socket connections have to be made by a qualified electrician, the rotation
direction of the saw blade has to be observed by starting the machine. If the saw blade
rotates in reverse direction, the socket connections have to be checked and re-
connected properly.
**If the saw blade rotates in reverse direction, it will cause danger for the operator and the
equipment.
Figure-3
To correct the rotation direction of the saw blade, insert the electric power socket of the
machine to the 3-phase slot, which has been prepared before, and follow these
instructions:
1. Press the Motor Start Button to operate the saw blade.
2. Press the cutting head down until the blade guard opens.
3. Press the Stop button. Observe the rotation direction of the saw blade through the open
part of the blade guard.
4. The correct direction of the saw blade rotation is shown in Figure 3.
If the saw blade rotates in reverse direction:
CAUTION !