Filter
Top Products
Operating and Safety Instructions
12
3.3.9.
Don’t use any materials other than those recommended by the manufacturer
for cutting operations on the machine.
3.3.10.
Ensure that the work piece is clamped appropriately by the machine's clamp
or vice.
3.3.11.
Ensure safe working position, always keep your balance.
3.3.12.
Keep your machine always clean for safe operation. Follow the instructions at
maintenance and replacement of accessories. Check the plug and cable regularly.
If damaged, let it replace by a qualified electrician. Keep handles and grips free of
any oil and grease.
3.3.13.
Unplug first, before conducting and maintenance works.
3.3.14.
Ensure that any keys or adjustment tools have been removed before
operating the machine.
3.3.15.
If you are required to operate the machine outside, use only appropriate
extension cables.
3.3.16.
Repairs should be carried out by qualified technicians only. Otherwise,
accidents may occur.
3.3.17.
Before starting a new operation, check the appropriate function of
protective devices and tools, ensure that they work properly. All conditions have to
be fulfilled in order to ensure proper operation of your machine. Damaged
protective parts and equipment have to be replaced or repaired properly (by the
manufacturer or dealer).
3.3.18.
Don’t use machines with improper functioning buttons and switches.
3.3.19.
Don’t keep flammable, combustive liquids and materials next to the machine and
electric connections.
4. TRANSPORT OF THE MACHINE
* The transport should be done by qualified personnel only.
The machine should be transported by lifting with proper equipment (not touching the
ground during the transport).
Don’t lift the machine before ensuring that lifting devices or other equipment is placed
properly under the machine.
IMPORTANT