Filter
Top Products
Operating and Safety Instructions
3
1. GENERAL INFORMATION
1.1. INTRODUCTION
The user’s manual given by the manufacturer contains necessary information about the
machine parts. Each machine operator should read these instructions carefully, and the
machine should be operated after fully understanding them.
Safe and efficient use of the machine for long term depends on understanding and
following the instructions contained in this manual. The technical drawings and details
contained in this manual constitute a guide for the operator.
1.2. DISTRIBUTOR
ATech Machine, Inc.
429 E. Diamond Ave. #F – Gaithersburg, MD 20877 USA
Phone: +1-301-556-9789 Toll Free: 1-866-80A-TECH Fax: +1-301-542-0140
Website: www.atechna.com E-mail: info@atechna.com
In case of any technical problem please contact your nearest ATECH dealer, or ATECH
head office through the above mentioned phone fax or e-mail address.
Technical labels with the model description of the machine are fixed onto the front side
of each machine.
The machine’s serial number and manufacturing year are stipulated on the technical
label.
2. MACHINE’S DESCRIPTION AND PURPOSE OF USE
2.1. MACHINE’S DESCRIPTION
Portable miter saw for serial cutting of PVC, aluminum and wooden profiles in desired
angles. The operator has the possibility to adjust the cutting speed of the saw blade via
knob according to material type and size.
Cutting at fixed angles of 15
0
-22.5
0
-30
0
-45
0
-90
0
, and at intermediate angles via fixing
arm. Machine has been designed according to CE Safety Directives.
PEGASUS-02 M / SKAT-02 M : Manual system with base and pneumatic clamps.
PEGASUS-02 P / SKAT-02 P : Portable manual system.