Filter
Top Products
-18-
EDGEFORMING DUST
EXTRACTION HOOD
Do not reach in area of the
bit while the router is ON or
plugged in. To avoid entangling hoses, do
not use this dust extraction hood at the
same time as any other dust extraction
hood.
This dust extraction hood (optional accessory)
is used for dust collection when edge-forming
(Fig. 19).
ATTACHING DUST EXTRACTION HOOD
You can attach the edge-forming hood in
several places according to your needs or
preferences. This hood is attached using two
of the screw holes on the router base that are
used to attach the router’s sub-base. Choose
the desired location for the hood. Loosen and
take out the two screws from the router base
and attach the dust extraction hood — over the
router’s sub-base — using the screws provided
with the hood. Securely tighten the screws.
(Figures 20 & 21).
DUST
EXTRACTION
HOOD
ROUTER
SUB-BASE
WORKPIECE
EDGE
!
WARNING
M4 x 16mm
SCREW
M4 x 16mm
SCREW
M4 x 16mm
SCREW
SUB-BASE
DUST
EXTRACTION
HOOD
M4 x 16mm
SCREW
FIG. 19
DUST
EXTRACTION
HOOD
FIG. 20
PLUNGE BASE
FIG. 21
OTHER BASES
BM 2610018532 01-12:BM 2610018532 01-12.qxp 1/23/12 9:21 AM Page 18