Filter
Top Products
Operation
-12- Q-Wash 260-LED User Manual Rev. 05
Reset Control
It is possible to select how you can reset the product, whether with the DMX controller or
only from the control panel.
1. Go to MENU > SPECIAL > RESET.
2. Select DMX or SYSTEM.
DMX:
Enables the DMX controller to reset the product (Control function).
SYSTEM:
Restricts the reset function to the control panel..
Move-in Black
This option allows you to activate or deactivate the move-in black 3-seconds delay.
1. Go to MENU > SPECIAL > BLACK.
2. Select YES to enable the 3 seconds delay or NO to make the blackout
immediate.
Power
You may use this function to boost the output power for specific, short-term applications.
1. Go to MENU > SPECIAL > POWER.
2. Select NORMAL or HIGH.
The product will return to Normal if the LEDs’ temperature becomes too high.
Color Settings
The COLOR setting determines how the Q-Wash 260-LED generates the white color
based on various RGB settings.
1. Go to MENU > SPECIAL > COLOR.
2. Select OFF, RGBTOW, or UC.
UC:
When the RGB faders are set to “255”, the output matches that of less
efficient products (Universal Color).
RGBTOW:
When the RGB faders are all set to “255”, the resulting output is defined by
RGB-W (see MENU > EXTRA > CALIB).
OFF:
When the RGB faders are all set to “255”, the output is maximum, although
the resulting white color may not be balanced.