Filter
Top Products
Technical Information
Q-Wash 260-LED User Manual Rev. 05 -19-
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, the user should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, the user should clean this product at least twice a month. Dust build up reduces
light output performance and can cause overheating. This can lead to reduced light
source life and increased mechanical wear.
To clean a product, follow the recommendations below:
Unplug the product from power.
Wait until the product is has cooled.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and accessible internal components.
Clean all external optics and glass surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Drag any dirt or grime to the outside of the glass surface.
Gently polish the glass surfaces until they are free of haze and lint.
Always dry the external optics and glass surfaces carefully after cleaning them.
Refrain from spinning this product’s fans using compressed air.