Operation
Q-Wash 260-LED User Manual Rev. 05 -15-
Menu Map
1
st
Level 2
nd
Level 3
rd
Level Description
INTRO
ADDRESS 001~512
Selects a starting DMX address
RESET NO/YES
Resets the product’s custom settings
FAN
HIGH
Select the fan’s operation mode.
NOTE: The fan will go to High mode if the product’s
internal temperature becomes too high, despite any
manual or DMX setting
NORMAL
LOW
UTO
RUN
DMX512
Selects DMX running mode
UTO 1
Selects the first automatic program
UTO 2
Selects the second automatic program
CUSTOM
Selects the user customizable program
SLAVE
Selects the Slave running mode
TEST
Starts the product’s test sequence
CHANNELS
BASIC
Selects the 9-channel DMX mode
DVANCED
Selects the 12-channel DMX mode
DISPLAY
60 CLOSE
Turns off the display after 60 seconds
BRIGHT
Keeps the display on
KEYLOCK NO/YES
Activates/deactivates the control panel password
DIMMER
DIMMER4~1 Slow (DIMMER4) to fast (DIMMER1) dimmer curves
DIMMER0
Linear dimmer
INFO EDITION
Shows the version of the installed S/W
INVERT
PAN
NORMAL/
REVERSE
Defines the direction of the pan fader
TILT
Defines the direction of the tilt fader
DIMMER
Defines the direction of the dimmer fader
USE NO/YES
Activates the changes
RANGE
P/START
000~255
Sets the pan start point (restricted range)
P/FINISH
Sets the pan end point (restricted range)
T/START
Sets the tilt start point (restricted range)
T/FINISH
Sets the tilt end point (restricted range)
USE
Activates the changes
SPECIAL
BLACKD NO/YES
Activates the move-in black delay (3 s)
RESET
DMX
The DMX controller can reset the product
SYSTEM
The control panel can reset the product
POWER
NORMAL/
HIGH
LEDs illuminate at normal or high intensity
NOTE: The product will return to Normal if the LEDs’
temperature becomes too high
COLOR
UC
RGBW = 255: The output matches that of older products
RGBTOW RGBW = 255: The RGBW output is set by RGB-W
OFF
RGBW = 255: The RGBW output is maximum
FAN
DMX
The DMX controller can set the fan speed
SYSTEM
The control panel can reset the fan speed
EDIT
STEP
000~255
Selects the program step
PAN
Selects the pan position
TILT
Selects the tilt position
SPEED
Selects the pan/tilt speed
RED
Combines red, green, and blue to obtain a custom color
GREEN
BLUE
Continues on the next page
