Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Basic Troubleshooting
MC-634
Cisco IOS Multiservice Applications Configuration Guide
508155.820 CMAC_LOG_RNG_REQ_TRANSMITTED
508155.824 CMAC_LOG_RNG_RSP_MSG_RCVD
508155.826 CMAC_LOG_ADJUST_RANGING_OFFSET -64
508155.826 CMAC_LOG_RANGING_OFFSET_SET_TO 11954
508155.828 CMAC_LOG_RANGING_CONTINUE
508165.892 CMAC_LOG_RNG_REQ_TRANSMITTED
508165.894 CMAC_LOG_RNG_RSP_MSG_RCVD
508165.896 CMAC_LOG_ADJUST_TX_POWER -9
508165.898 CMAC_LOG_POWER_LEVEL_IS 31.0 dBmV (commanded)
508165.900 CMAC_LOG_RANGING_CONTINUE
508175.962 CMAC_LOG_RNG_REQ_TRANSMITTED
508175.964 CMAC_LOG_RNG_RSP_MSG_RCVD
508175.966 CMAC_LOG_RANGING_SUCCESS
508175.968 CMAC_LOG_STATE_CHANGE dhcp_state
508176.982 CMAC_LOG_DHCP_ASSIGNED_IP_ADDRESS 188.188.1.62
508176.984 CMAC_LOG_DHCP_TFTP_SERVER_ADDRESS 4.0.0.1
508176.986 CMAC_LOG_DHCP_TOD_SERVER_ADDRESS 4.0.0.32
508176.988 CMAC_LOG_DHCP_SET_GATEWAY_ADDRESS
508176.988 CMAC_LOG_DHCP_TZ_OFFSET 360
508176.990 CMAC_LOG_DHCP_CONFIG_FILE_NAME platinum.cm
508176.992 CMAC_LOG_DHCP_ERROR_ACQUIRING_SEC_SVR_ADDR
508176.996 CMAC_LOG_DHCP_COMPLETE
508177.120 CMAC_LOG_STATE_CHANGE establish_tod_state
508177.126 CMAC_LOG_TOD_REQUEST_SENT
508177.154 CMAC_LOG_TOD_REPLY_RECEIVED 3107617539
508177.158 CMAC_LOG_TOD_COMPLETE
508177.160 CMAC_LOG_STATE_CHANGE security_association_state
508177.162 CMAC_LOG_SECURITY_BYPASSED
508177.164 CMAC_LOG_STATE_CHANGE configuration_file_state
508177.166 CMAC_LOG_LOADING_CONFIG_FILE platinum.cm
508178.280 CMAC_LOG_CONFIG_FILE_PROCESS_COMPLETE
508178.300 CMAC_LOG_STATE_CHANGE registration_state
508178.302 CMAC_LOG_REG_REQ_MSG_QUEUED
508178.306 CMAC_LOG_REG_REQ_TRANSMITTED
508178.310 CMAC_LOG_REG_RSP_MSG_RCVD
508178.312 CMAC_LOG_COS_ASSIGNED_SID 5/19
508178.314 CMAC_LOG_COS_ASSIGNED_SID 6/20
508178.316 CMAC_LOG_COS_ASSIGNED_SID 7/21
508178.318 CMAC_LOG_RNG_REQ_QUEUED 19
508178.320 CMAC_LOG_REGISTRATION_OK
508178.322 CMAC_LOG_REG_RSP_ACK_MSG_QUEUED 0
508178.324 CMAC_LOG_STATE_CHANGE establish_privacy_state
508178.326 CMAC_LOG_NO_PRIVACY
508178.328 CMAC_LOG_STATE_CHANGE maintenance_state
You can display other aspects of the MAC layer by adding the following keywords to the show
controllers cable-modem 0 mac command:
uBR924# show controllers cable-modem 0 mac ?
errors Mac Error Log data
hardware All CM Mac Hardware registers
log Mac log data
resets Resets of the MAC
state Current MAC state
For examples and descriptions of how to use these keywords, see the show controllers cable-modem
mac command reference page in the Cisco IOS Multiservice Applications Command Reference
publication.
The MAC log file gives a detailed history of initialization events that occur in the Cisco uBR900 series
cable access router. All pertinent troubleshooting information is stored here.