Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Configuration Examples
MC-653
Cisco IOS Multiservice Applications Configuration Guide
cable-modem downstream saved channel 477000000 56
no cable-modem compliant bridge
!
!
router rip
version 2
network 24.0.0.0
network 10.0.0.0
!
ip classless
no ip http server
!
line con 0
transport input none
line vty 0 4
!
end
VoIP Bridging Using H.323v2 Configuration Example
In this example, the Cisco uBR924 is configured for bridging, with an H.323v2 dial peer to another
Cisco uBR924 attached to the same downstream interface on the headend CMTS.
Current configuration:
!
! Last configuration change at 21:54:41 - Thu Dec 16 1999
! NVRAM config last updated at 21:56:20 - Thu Dec 16 1999
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 2007
!
clock timezone - 3
ip subnet-zero
no ip routing
!
voice-port 0
input gain -3
!
voice-port 1
input gain -3
!
dial-peer voice 1 pots
destination-pattern 6501
port 0
!
dial-peer voice 2 pots
destination-pattern 6502
port 1
!
dial-peer voice 62 voip
destination-pattern 620.
session target ipv4:10.1.71.62
!
interface Ethernet0
ip address 10.1.71.65 255.255.255.0
no ip directed-broadcast