Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Configuration Examples
MC-654
Cisco IOS Multiservice Applications Configuration Guide
no ip route-cache
bridge-group 59
bridge-group 59 spanning-disabled
!
interface cable-modem0
description DHCP Reserved Address 10.1.71.65
ip address 10.1.71.65 255.255.255.0
no ip directed-broadcast
no ip route-cache
cable-modem downstream saved channel 537000000 27
bridge-group 59
bridge-group 59 spanning-disabled
!
ip classless
no ip http server
!
line con 0
exec-timeout 0 0
transport input none
line vty 0 4
!
end
VoIP Routing Using H.323v2 Configuration Example
In this example, the Cisco uBR924 is configured for IP routing, with an H.323v2 dial peer to another
Cisco uBR924 attached to the same downstream interface on the headend CMTS.
Current configuration:
!
! No configuration change since last restart
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 2007
!
class-map class-default
match any
!
clock timezone - 3
ip subnet-zero
!
voice-port 0
!
voice-port 1
!
dial-peer voice 1 pots
destination-pattern 6101
port 0
!
dial-peer voice 2 pots
destination-pattern 6102
port 1
!
dial-peer voice 101 voip
destination-pattern 620*
codec g711alaw
session target ipv4:10.1.71.62