Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Reestablishing DOCSIS-Compliant Bridging
MC-648
Cisco IOS Multiservice Applications Configuration Guide
After entering this command, perform a warm reset of the Cisco uBR900 series cable access router by
pressing and holding down the Reset button for less than 10 seconds. For information on the location
and operation of the Reset button, refer to the “Product Overview” chapter of the Cisco uBR924
Hardware Installation Guide.
Verifying DOCSIS-Compliant Bridging
To verify that the cable access router is configured for DOCSIS-compliant bridging, enter the show
startup-config command in privileged EXEC mode. The configuration should look like this:
uBR924# show startup-config
Building configuration...
Current configuration:
!
version 12.1
service config
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname uBR924
!
clock timezone - 4
ip subnet-zero
no ip routing
!
voice-port 0
!
voice-port 1
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
no ip route-cache
bridge-group 59
bridge-group 59 spanning-disabled
interface cable-modem0
no ip address
no ip directed-broadcast
no ip route-cache
no keepalive
cable-modem downstream saved channel 699000000 36
bridge-group 59
bridge-group 59 spanning-disabled
!
ip classless
no ip http server
!
line con 0
transport input none
line vty 0 4
login
!
end