Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Configuration Examples
MC-657
Cisco IOS Multiservice Applications Configuration Guide
application SGCPAPP
port 1
!
process-max-time 200
!
interface Ethernet0
ip address 188.186.1.14 255.255.0.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
bridge-group 59
bridge-group 59 spanning-disabled
!
interface cable-modem0
ip address 188.186.1.14 255.255.0.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
cable-modem downstream saved channel 699000000 27
bridge-group 59
bridge-group 59 spanning-disabled
!
ip classless
no ip http server
!
!
line con 0
transport input none
line vty 0 4
login
!
end
IPSec Configuration Example
Note Encryption/decryption is subject to export licensing controls. To support IPSec, the
Cisco uBR900 series must be configured in routing mode. The software images running at
both the headend and the subscriber end must support the feature set.
Note Careful address assignment on user equipment and policy routing at the headend is
required. The headend may or may not use tunnels to convey traffic back to the corporate
gateway.
For detailed information on IP security, L2TP, and firewalls, refer to the Cisco IOS Security
Configuration Guide.
Current configuration:
!
Last configuration change at 23:24:55 - Thu Dedc 16 1999
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
!