Filter
Top Products
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Configuration Examples
MC-659
Cisco IOS Multiservice Applications Configuration Guide
Note Careful address assignment on user equipment and policy routing at the headend is
required. The headend may or may not use tunnels to convey traffic back to the corporate
gateway.
For detailed information on IP security, L2TP, and firewalls, refer to the Cisco IOS Security
Configuration Guide.
Current configuration:
!
! Last configuration change at 20:24:59 - Thu Dec 23 1999
! NVRAM config last updated at 20:34:52 - Thu Dec 23 1999
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
!
hostname Router
!
class-map class-default
match any
!
!
clock timezone - 0 1
ip subnet-zero
ip tftp source-interface cable-modem0
no ip domain-lookup
!
vpdn enable
!
vpdn-group 1
accept dialin l2tp virtual-template 1 remote L2TP_LAC
no l2tp tunnel authentication
!
!
interface Ethernet0
ip address 80.1.1.1 255.255.255.0
no ip directed-broadcast
!
interface Virtual-Template1
ip unnumbered Ethernet0
no ip directed-broadcast
peer default ip address pool dialup
ppp authentication chap
!
interface cable-modem0
ip address 255.255.0.0
no ip directed-broadcast
cable-modem downstream saved channel 639000000 38
no cable-modem compliant bridge
!
router rip
version 2
network 10.0.0.0
network 24.0.0.0
!
ip local pool dialup 24.1.0.100
ip classless
no ip http server
!