Cisco Systems MC-607 Saw User Manual


 
Configuring Subscriber-End Broadband Access Router Features
Subscriber-End Broadband Access Router Configuration Examples
MC-656
Cisco IOS Multiservice Applications Configuration Guide
ip classless
ip route 0.0.0.0 0.0.0.0 24.3.90.2
access-list 1 permit any
!
line con 0
line vty 0 4
login
!
end
VoIP Bridging Using SGCP Configuration Example
In this example, Cisco uBR924 is configured to support VoIP in bridging mode using SGCP. Note the
following in the sample configuration file:
SGCP is enabled.
The call agent IP address is specified.
The SGCP application is specified for each port.
To configure this application via DHCP, the following fields must also be set:
Host name
Domain name
Domain Name System (DNS) server
Merit dump file — S:0:<call agen FQDN>:S:1<call agent FQDN>
Current configuration:
!
! Last configuration change at 16:30:00 - Thu Dec 16 1999
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname art1
!
clock timezone - 0 6
ip subnet-zero
no ip routing
ip domain-name cisco.com
ip name-server 4.0.0.32
!
sgcp
!
xgcp snmp sgcp
!
!
voice-port 0
!
voice-port 1
!
dial-peer voice 100 pots
application SGCPAPP
port 0
!
dial-peer voice 101 pots