Filter
Top Products
5
OPERATING INSTRUCTIONS
FOREWORD
Delta Model 36-220 is a 10" Compound Miter Saw designed to cut wood. It can crosscut up to 2-
3
/4" x 5-
1
/8", miter at
45° both left and right 2-
3
/4" x 3-
1
/2", bevel at 45° left 1-
3
/4" x 5-
1
/8", and compound 45° x 45°, 1-
3
/4" x 3-
1
/2". It has miter
stops at 0°, 15°, 22.5°, 30°, and 45° degrees both left and right, and positive bevel stops at 0° and 45° left. It also
includes the following features; Double Insulated construction for operator safety, D-handle design with trigger switch
for positive control, lock-out button to prevent accidental starts, Electric brake automatically stops blade in seconds,
Automatic retracting see-thru blade guard, Built-in arbor lock for easy single wrench blade changes, Dust bag, Work
supports, Extra-wide fence and Replaceable cut-thru table insert for optimum chipbreaking.
UNPACKING
Remove the miter saw and all loose items from the carton. IMPORTANT: DO NOT LIFT THE MITER SAW BY THE
SWITCH HANDLE OR TABLE CONTROL HANDLE AS THIS MAY CAUSE MISALIGNMENT. ALWAYS LIFT THE
MACHINE BY THE BASE.
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE
UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE
ENTIRE OWNER’S MANUAL.
ASSEMBLY INSTRUCTIONS
WARNING: MAKE CERTAIN THE POWER CORD IS DISCONNECTED FROM THE POWER SOURCE
DURING THE COMPLETE ASSEMBLY PROCEDURE.
Fig. 1