Filter
Top Products
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service
.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings
.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate
.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
3
Symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear eye protection.
Wear hearing protection.
Wear breathing protection.
Conforms to EMC regulations..
Specifications
Voltage: 230–240Vac ~ 50Hz
Input power: 2000W
No load speed: 5800min
-1
Blade diameter: 250mm
Blade bore size: 16mm
Blade teeth: 24
Table size: 660mm x 440mm
Side extension table sizes: 130mm x 440mm
with 150mm slide capacity
Rear extension table size: 660mm x 130mm
Table height: 880mm
Depth of cut at 90°: 75mm
Depth of cut at 45°: 45mm
Laser class: 1
Laser wavelength: 650nm
Laser output power: ≤ 1Mw
Warnings
1. It may be more difficult to see the laser line in
conditions of bright sunshine and on certain surfaces.
2. When storing the tool, remove the batteries in case
of leakage.
3. Batteries or damage due to leaking batteries are
not covered under warranty.