Filter
Top Products
8
Components
The GMC LS250TS table saw is supplied with the following
components:
1. Table saw
2. Riving knife and laser assembly
3. Blade guard
4. Wheels x2
5. Hubcaps x2
6. Rip fence
7. Mitre gauge
8. Push stick
9. Spanner
10. Left hand side extension table
11. Rear extension table
12. Height adjustment handle with hex screw,
swivel tube and washer
13. 5mm Hex key
14. Wheel axle
15. AAA batteries x2
16. 2 x 13mm Hex head screws with 4 flat washers
and 2 spring washers for securing wheels to axle
(already fitted on axle)
17. 10 x ST4.2 x 13mm Philips head screws with
10 flat washers for securing hub caps to wheels
18. 4 x ST4.2 x 9mm set screws for securing side extension
tables (already fitted to extension table rods)
1
4
15 16 17 18
3
5
6 7 8 9
10
11
12
13
14
2