Filter
Top Products
Fluid Supply
Single Color C
onnections
NOTE: Check valves (J, L) are provided on the inlet
(K) and outlet (H) manifolds of each pump.
1. Connect the c
olor supply line to the pump fluid
inlet fitting
(S).
2. Connect the c
olor outlet line to the pump fluid
outlet fittin
g(R).
3. Make the sam
e connections on the catalyst side.
NOTE: For isocyanate catalyst materials, moisture
resistant hose is required to supply fluid to the system
andalsoasafluidlinebetweenthepumpandthe
mix manifold.
Figure 12 Pump Inlet and Outlet Connections
Color Change C
onnections
If you are installing the color change accessory kit,
make the fluid connections as described in manual
333282.
2
2
332458B