Repair
Replace the Battery
A lithium battery maintains the ADM clock when the
power is not connected.
Sparking can occur when changing the battery.
Replace the battery only in a non-hazardous
location, away from flammable fluid or fumes.
1. Turn off the PD2K power switch.
2. Remove the rear access panel.
Figure 22 Remove Battery Panel
3. Removetheoldbatteryandreplacewithanew
CR2032 battery.
4. Replace the rear access panel.
5. Turn the power switch on.
6. Dispose of the old battery according to your
federal, state, and local waste regulations.
332709B 37