Filter
Top Products
Overall View
10 311321H
Mixing Module
All gun models employ the concept of impinge-
ment mixing through the use of a single-part
MIXING MODULE. This system is cleaned by
a mechanical self-cleaning process, eliminat-
ing the need for solvent or air purging between
dispenses.
The gun can be assembled with two styles of
mixing components; their selection is depen-
dent upon the type of system sprayed. The
Set-Up Charts on pages 44 and 46 show sev-
eral of the more common sets of these config-
urations.
The Mixing Module, in combination with a Pat-
tern Control Disc (PCD), produce a thoroughly
mixed chemical and reliable spray patterns.
The module can be set up to spray at its maxi-
mum rated output. Additionally, by changing to
a smaller PCD the module can spray at the low
outputs and pressures that are required for
detail work.
FIG. 7: GX-7A Mixing Module
.
FIG. 8: GX-7 400 Mixing Module
.
FIG. 9: GX-7 DI Mixing Module
Valving
Rod
Mixing Module
(round or flat)
PCD (round or flat)
Valving Rod
Mixing Module (round or flat)
PCD (round or flat)
Valving Rod
Mixing Module (round or flat)
PCD (round or flat)