Filter
Top Products
G0526 6" Jointer -11-
The Model G0526 is shipped from the manufac-
turer in carefully packed boxes. If you discover
the machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
parts.
The purpose of this section is to guide you
through the required steps to get your machine
out of its packaging and into operating condition.
Wear safety glasses dur-
ing the entire set up
process!
This machine presents
serious injury hazards
to untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations before start-
ing the machine!
Unpacking
Parts Inventory
About This Section
SECTION 5: SET UP
A. Push Paddles ............................................2
B. Jointer Stand..............................................1
C. Jointer ........................................................1
D. Fence (Ship Attached To Jointer) ..............1
Figure 3. Loose components.
E. Indexable Cutters ......................................5
F. Flat Hd Torx Screws M6-1.0 x 15 ..............10
G. Torx Bits ....................................................5
H. Torx T-Handle Driver 6mm (Not Shown) ..1
Figure 4. Spiral cutterhead bag contents.
A
B
C
D
G
F
E