Filter
Top Products
-16-
G0526 6" Jointer
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Sharp edges on metal
parts may cause person-
al injury. Examine the
edges of all metal parts
before handling.
This section covers the basic assembly and
adjustment instructions needed to begin opera-
tion. Complete the assembly in the order provid-
ed in this manual and then read the remaining
portion of the manual before attempting any type
of operation.
Your safety is important! Please follow the
warnings below during this entire section:
!
Disconnect power to
the machine during the
entire assembly
process. Failure to do
this may result in seri-
ous personal injury.
Components and Hardware Needed: Qty
Jointer ..........................................................1
Jointer Stand................................................1
Hex Bolts
3
⁄8"-16 x
3
⁄4" ..................................3
Lock Washers
3
⁄8" ........................................3
Tools Needed:
14mm Wrench or Socket ............................1
To mount the jointer to the stand:
1. With the help of an assistant, lift the jointer
onto the stand.
2. Align the three bolt holes on the jointer with
the three holes on the stand (Figure 13).
3. Using a 14mm wrench, secure the jointer to
the stand with the hex bolts and lock washers.
The jointer assembly is a
heavy part. Seek assis-
tance when lifting it onto
the jointer stand.
Figure 13. Mounting holes.
Mounting Holes
Jointer To StandBeginning Assembly