Filter
Top Products
-10-
G0524 Rip Saw
Control Panel
A. EMERGENCY STOP Button—Disconnects
power to all motors in the motor cabinet.
B. MAIN MOTOR START Button
—Starts the
saw blade.
C. FEED MOTOR START Button
—Starts the
conveyor track.
D. POWER Light—Indicates there is power to
the control panel
.
E. MAIN MOTOR
STOP Button—Stops the
saw blade.
F. FEED MOTOR STOP Button
—Stops the
conveyor track.
A
B
C
D
E
F
Figure 8. Control panel.
Figure 7. Variable speed knob close-up.
Figure 6. Blade compartment close-up.
K. Pressure Rollers—(1 of 4) Holds the
workpiece against the conveyor track during
the cutting operation.
L. Auxiliary Pressure Rollers—(2 of 4) Must
be used when rip cutting workpieces shorter
than 8
1
⁄2" long.
M. Saw Blade—Performs the cutting operation.
N. Lubrication Points—(2 of 4) Grease fittings
that need to be lubed periodically with a
grease gun.
O. Variable Speed Adjustment Knob—
Turn
the dial clockwise to decrease the feed rate
and counterclockwise to increase it. The feed
rate is variable between 30-112 FPM.
O
N
L
M
K