Filter
Top Products
G0524 Rip Saw -15-
The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship
-
ment. Remove this protective coating with a sol
-
vent cleaner or citrus-based degreaser such as
Grizzly’s G7895 Degreaser. To clean thoroughly,
some parts may need to be removed. For opti
-
mum performance from your machine, make
sure you clean all moving parts or sliding
contact surfaces that are coated. Avoid chlo
-
rine-based solvents as they may damage painted
surfaces should they come in contact.
Gasoline and petroleum
products have low flash
points and could explode
if used to clean machin
-
ery. DO NOT use gasoline
or petroleum products to
clean the machinery.
Smoking near solvents
could ignite an explosion
or fire and cause serious
injury. DO NOT smoke
while using solvents.
Lack of ventilation while
using solvents could
cause serious person
-
al health risks, fire, or
environmental hazards.
Always work in a well
ventilated area to pre
-
vent the accumulation
of dangerous fumes.
Supply the work area
with a constant source
of fresh air.
Clean Up
Unsupervised children and
visitors inside your shop
could receive serious per
-
sonal injury. Ensure child
and visitor safety by keep
-
ing all entrances to the
shop locked at all times.
DO NOT allow unsuper
-
vised children or visitors
in the shop at any time.
Floor Load
The Model G0524 weighs 1980 lbs. Most com
-
mercial floors are suitable for your machine.
Some floors may require additional reinforcement
to support the machine, the operator, and the
workpiece.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your saw. See Figure 12 for the footprint of the
Model G0524.
Figure 12. Model G0524 footprint.
FRONT
62"
45"
Site Considerations