Filter
Top Products
G0555X 14" Extreme Series Bandsaw
-13-
Floor Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some residential floors may require additional
reinforcement to support both the machine and
operator.
Placement Location
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See Figure
4 for the minimum
working clearances.
Children and visitors may be
seriously injured if unsuper
-
vised. Lock all entrances to
the shop when you are away.
DO NOT allow unsupervised
children or visitors in your
shop at any time!
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly’s G7895
Degreaser. To clean thoroughly, some parts must
be removed. For optimum performance from
your machine, clean all moving parts or slid-
ing contact surfaces. Avoid chlorine-based sol
-
vents, such as acetone or brake parts cleaner that
may damage painted surfaces. Always follow the
manufacturer’s instructions when using any type
of cleaning product.
Site ConsiderationsClean Up
Figure 4. Minimum working clearances.
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery. DO
NOT use these products
to clean the machinery.
Many cleaning solvents
are toxic if inhaled.
Minimize your risk by only
using these products in a
well ventilated area.
Figure 3. Grizzly citrus degreaser.
G7895—Grizzly Citrus Degreaser
This natural, citrus-based degreaser is a great
solution for removing export grease, and it’s much
safer to work around than nasty solvents.