Filter
Top Products
-26-
Model G0790 (Mfd. Since 9/15)
Feed Roller Chain Drive
Items Needed Qty
Grease .....T23964 NLGI#2 or Equivalent Grease
Lubrication Frequency .............................Monthly
To lubricate feed roller chain drive:
1. DISCONNECT MACHINE FROM POWER!
2. Remove (4) M6-1 x 12 button head cap
screws.
3. Remove side cover to expose chain (see
Figure 25).
4. Use mineral spirits, stiff brush, and shop rags
to clean old grease from chain.
5. Apply light coating of grease to chain linkage
and sprockets.
6. Re-install side cover.
Table Height Chain
Items Needed Qty
Grease .....T23964 NLGI#2 or Equivalent Grease
Lubrication Frequency .............................Monthly
To lubricate table height chain:
1. DISCONNECT MACHINE FROM POWER!
2. Gently tilt machine onto its side (see Figure
26) to expose chain.
Figure 25. Cutterhead elevation leadscrews and
feed roller drive chain exposed for lubricating.
Feed Roller Chain
Sprockets
3. Use mineral spirits, stiff brush, and shop rags
to clean old grease from chain.
4. Apply light coating of grease to chain linkage
and sprockets.
5. Tilt machine back onto its base.
Figure 26. Table height chain and sprockets
exposed for lubricating.
Table Height Chain
Sprockets