Filter
Top Products
G1052 9" Bandsaw -7-
Unpacking
The bandsaw is shipped from the factory in a
carefully packed carton. If you find the machine to
be damaged after you’ve signed for delivery and
the truck and driver are already gone, you will
need to file a freight claim with the carrier. Save
the containers and all packing materials for
inspection by the carrier or their agent. Without
the packing materials, filing a freight claim can be
difficult. If you need advice regarding this situa-
tion, please call us immediately.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G1052 is a heavy machine with a ship-
ping weight of 100 lbs. DO NOT over-exert
yourself while unpacking or moving your
machine – get assistance. In the event that
your bandsaw must be moved up or down a
flight of stairs, be sure that the stairs are
capable of supporting the combined weight
of people and the machine. Serious person-
al injury may occur.
Parts Inventory
NOTICE
Save all containers and packing materials
until you are satisfied that your bandsaw
has arrived in good condition. Freight com-
pany adjusters will want to inspect those
materials in the event that a freight claim
must be made.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
With all the parts removed from the container,
you should have:
• Bandsaw Unit with Blade
• Miter Gauge
• Table
• Fence
If anything is missing, call or write to the service
department listed earlier in this section.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.