Filter
Top Products
-8- G1066/G1066Z/G1079 Drum Sander
Unpacking
The Model G1066/G1066Z/G1079 Drum Sander
is shipped from the manufacturer in a carefully
packed carton. If you discover your machine is
damaged after you have signed for delivery, and
the truck and driver are gone, you will need to file
a freight claim with the carrier. Save the contain-
ers and all packing materials for possible inspec-
tion by the carrier or its agent. Without the pack-
ing materials, filing a freight claim can be difficult.
If you need assistance determining whether you
need to file a freight claim, or with the procedure
to file one, please contact our Customer Service.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Drum Sander Unit
• Control Panel [G1066Z]
• 4'' Dust Port (2)
•Crank Arm
• Crank Handle
• Paper Retaining Clip (2) [G1066/G1079]
• Self Tapping Screws #8 x
1
⁄2" (8)
• Flat Washers #8 (8)
•3MM Hex Wrench
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedien-
cy, replacements can be obtained at your local
hardware store.
The Model G1066/G1066Z/G1079 is a heavy
machine (approx. 430 and 285 lb. shipping
weights respectively). DO NOT over-exert
yourself while unpacking or moving your
machine—get assistance. In the event that
your Drum Sander must be moved up or
down a flight of stairs, be sure that the
stairs are capable of supporting the com-
bined weight of people and the machine.
Serious personal injury may occur if they
are not.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.