Filter
Top Products
-8-
G4015Z Lathe/Mill
Unpacking
This combination lathe/mill is shipped from the
manufacturer in a carefully packed crate. If you
discover the machine is damaged after you’ve
signed for delivery, and the truck and driver are
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for possible inspection by the carrier or its
agent. Without the packing materials, filing a
freight claim can be difficult. If you need assis-
tance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Piece Inventory
The Model G4015Z is, for the most part, pre-
assembled at the factory. Inside the crate you’ll
find:
• The Model G4015Z Combination Lathe/Mill
•6 mm Allen
®
Wrench
•5 mm Allen
®
Wrench
•4 mm Allen
®
Wrench
•3 mm Allen
®
Wrench
• Open End Wrench
• 24T Gear
• 25T Gear
• 27T Gears
• 30T Gear
• 33T Gear
• 36T Gear
• 42T Gear
• 48T Gear
• 60T Gear
• 72T Gear
•120T Gear
• 125/127T Combination Gear
• 120/60T Combination Gear
• Lathe Chuck Key
• Drill Chuck (Installed)
• Drill Chuck Arbor (Installed)
• Drill Chuck Key
•3 Outside Jaws
•(2) MT #3 Centers
• Knock Out Wedge
• Handle
• Hand Crank
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.