Filter
Top Products
-31-G4015Z Lathe/Mill
It is vital that you become familiar with the control
panel before operating the Model G4015Z.
Power to the motor is controlled through a series
of switches mounted on the Lower Belt Guard.
Figure 37 shows the various buttons and light.
Please examine the layout and note the list of
functions to the right before running the
lathe/mill.
Figure 37. Control panel components.
Control Panel
1
2
3
4
5
1. Power indicator light – shines when power is
turned on using the system reset switch.
2. Motor off button – turns motor off.
3. Motor on button – turns motor on.
4. Reversing switch – selects direction of rota-
tion for spindles. Lift the cover to access the
switch. Pushing the button on the left hand
side allows the motor to operate in the for-
ward direction. Push the button on the right
hand side and the motor reverses.
5. System reset – disconnects power from sys-
tem. Rotate the button and allow to pop out.
In the event of an emergency, the button can
be depressed and all power to the motor will
be turned off.
SECTION 9: OPERATIONS