Filter
Top Products
-20-
H8203 Professional Drill Sharpening Machine
To replace the grinding wheel:
1. DISCONNECT THE SHARPENER FROM
POWER!
2. Use the included hex wrench to loosen the
cap screw securing the grinding wheel cover
at the back of the grinder, then tilt the cover
away from the grinder (
Figure 28).
Figure 28. Removing grinding wheel cover cap
screw.
2. Remove the mounting screw, flat washer and
gasket, fan and grinding wheel, as shown in
Figure 28.
Figure 29. Removing grinding wheel.
Fan
3. Insert the new grinding wheel and reinstall the
components removed in Step 2 in reverse.
4. Secure the cover with the cap screw removed
in Step 1.
Grinding
Wheel
Cap
Screw
Washer
and Gasket