Page 4SKU 43378
19. Do not operate tool if under the inuence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
20. Use proper size and type extension cord. If an extension cord is required, it must
be of the proper size and type to supply the correct current to the tool without heating
up. Otherwise, the extension cord could melt and catch re, or cause electrical
damage to the tool. This tool requires use of an extension cord of 0 to 12 amps
capability (up to 50 feet), with wire size rated at 16 AWG. Longer extension cords
require larger size wire (smaller AWG number). If you are using the tool outdoors, use
an extension cord rated for outdoor use. (signied by “WA” on the jacket).
21. Secure Workpiece. Use clamps or a vise to hold workpiece, if possible. Never hold
workpiece with your hands.
22. Never leave Drill Press running unattended. Turn the power OFF.
23. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualied technician.
24. People with pacemakers should consult their physician(s) before use.
Electromagnetic elds in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
25. WARNING: This product contains or, when used, produces a chemical known to
the State of California to cause cancer and birth defects or other reproductive
harm. (California Health & Safety Code § 25249.5, et seq.)
Note: Performance of this tool may vary depending on variations in local line voltage. Exten-
sion cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Rev 07i