Filter
Top Products
Page 6SKU 43378
5. Never place hands and arms near the workpiece to avoid the possibility of the work
piece coming loose and striking you.
6. Before drilling, turn on the motor and check for bit wobble or machine vibration. If this
is found, correct the problem before drilling.
7. Set the proper spindle speed for the specic drilling operation.
8. When nished with the Drill Press, always press the Switch to the OFF position, and
remove the Lock Key.
9. Do not mount (or adjust) the workpiece on the Drill Press Table while the motor is
running.
10. When drilling or cutting large holes, use the slower speeds and securely fasten the
workpiece to the table using a mounted vise.
11. Do not use drill bits that extend more than six inches from the Chuck.
12. Do not use circle cutters, rotary planers, wire wheels, router bits, or shaper cutters on
this Drill Press.
Unpacking
When unpacking, check to make sure the following parts are included.
Head Assembly
Motor (13)
Table (B15)
Column (B1)
Base (B6)
- Bag of Loose Parts
- Box of Loose Parts
Table Arm Assembly
Column Support (B4)
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
Rev 07i