SKU 45804 PAGE 10
15. Always use the proper size and type of Saw Blade (3):
Item #529 is recommended - 10” M2 Molybdenum Tipped (40 Tooth) saw.
16. Never perform layout, assembly, or setup work on the Table of the Table Saw
when the machine is running.
17. Always disconnect the Table Saw from its electrical outlet before performing
any services, maintenance, or cleaning such as leaving the work area, moving
the tool from one location to another, changing Saw Blades, cleaning sawdust from
the unit, etcetera.
18. Before use, the Table Saw should be placed on a flat, stable surface, capable
of supporting the weight of the tool and workpiece, and any additional
pressure caused by working on it. Mounting the Table Saw to the surface is
recommended -see Appendix A on page 22 for mounting details.
19. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
(a) Lead from lead-based paints;
(b) Crystalline silica from bricks and cement or other masonry products;
(c) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals; work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles. (California Health & Safety
Code 25249.5, et seq.)
20. WARNING! People with pacemakers should consult their physician(s) before using
this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts
Lists and Assembly Diagrams on pages 18-21 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Note: While unpacking and before attempting assembly; loosen the motor,
remove the two styrofoam inserts that hold the motor in place during
packing, and retighten the motor.