Filter
Top Products
SKU 45804 PAGE 17
3. Remove cut-off pieces and scraps from the Table before starting the Table
Saw. Before cutting, ensure the machine is switched off. While the Saw Blade (3) is
completely stopped; unplug the machine, remove the Blade following the instructions
on pages 11 and 12, and remove all debris.
Warning! Allowing sawdust, scraps, or other debris to accumulate can cause a
fire, resulting in severe personal injury or property damage.
4. With a brush, soft cloth, or vacuum, remove all sawdust from the Table Saw.
5. Do not use solvents to wipe off the Table Saw, as damage may result. If necessary,
wipe with a damp cloth. You may use a mild detergent.
Warning! Do not introduce water into the electric motor through the motor vents.
6. Once clean, lubricate all moving parts with a light oil.
7. When storing, keep the Table Saw covered with a cloth cover.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED
THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.